A CLEAN REAR IS A HAPPY REAR

Well we got the narrowed 9" rear end back and now I have some serious clean up to do before Marty fabricates the four-link rear suspension. I'll be deburring it and cleaning up both the factory welds and the welds made in shortening it before it goes back to Marty's. I'll also be cleaning up the backing plates and rebuilding the rear brakes with new parts and ordering a set of new cut-to-fit axles.  The measurement from flange-to-flange is now 51". We took about 8" out of the Ford Bronco 9".

Here are some shots of the clean-up effort in progress.

PRESENTING LB TIKI

The John Deere seat buckets arrived at HouseOSpeed headquarters (aka my garage) today and I really dig 'em. I was initially concerned that they might be too small but upon test-sitting them, they seem like they'll be perfect. They're a lot like bomber buckets albeit more utilitarian. I'll be running them out to Marty's this week to see how they fit in the roadster's interior. I think they're going to be very cool with a low key, functional vibe. Speaking of very cool, I also found another color reference for my roadster's paint. It's on a car known as LB Tiki , which was built by a cat named Ivan who lived in Long Beach. I've linked a pretty interesting HAMB post on the car being driven from CA to Florida by its present owner. Anyway, Ivan (whose last name escapes me) is an old pal of Marty's and now lives in Lockhart, Texas. I've chatted with him a few times at car shows about how much I dug his car, which not unlike my 65 Suburban ,  has an unmistakable tiki mojo.  Small world, huh? Anyhow, his car has lived in a file in the back of my mind for years but I came across it just the other day on the internet and grabbed these shots for posterity. So here's LB Tiki, and a color that is damn near what I'd like to have on my roadster.

Later...

FRAME ALMOST A WRAP

Here are some update shots of the frame. Marty did his final welds. As you can see we're going to placing speed holes here and there, just to keep things interesting.  Note the circular pieces mounted below the motor mount pockets.

The transmission mount is in place, as well as rear crossmember. Won't be long before we're plumbing brake lines and routing wires. First we've got the rear end to install, as well as the cowl steering. Still, we're making some good progress now.

VALVE COVERAGE

One of the options for valve covers: Edelbrocks, finned and polished.

All mocked-up after a long day of metal prep.

Still have to get the intake polished and the carbs rebuilt.

MORE ENGINE DETAILING

First, an arty shot of my engine with the carbs and intake set in place. Both still need to be rehabbed but you can't blame a guy from wanting to know how the engine's gonna look.

After another full day of deburring, it's as if it'll never end. Actually, it's looking quite nice but I can see how this would appeal to a person's obsessive compulsive nature. I'm cautiously optimistic that I've cleared the halfway point.

DEBURRING IS A GENUINE PAIN

Well, I just spent an entire freakin' day in the garage continuing to debur the 327, switching between air tools and my drill motor and employing a number of different grinding stones and wire wheels. It was alot of work. All told, I'll spend probably thirty hours removing edges, sharp corners, and every bit of grease, grime, paint accumulated over the course of the engine's four prior decades. If it's true that great paint is in the prep, I should be rewarded with a sweet little engine that stands out nicely. I'm leaning towards painting the engine block the green color I have in mind for the body color, or argent, the color of the vintage Torq Thrust's spokes. Fortunately, I'll have lots of time to think about it as I continue to smooth the cast iron. In the end, I'll be laying on a two stage basecoat/ clearcoat. Stay tuned.

A SIMPLE STEERING WHEEL

The more I thought about the steering wheel and how important it is for all 6'5" of me to fit in the car's cockpit, the more I realized a larger period wheel probably wasn't going to be the right cal for me. After considering a number of options, from a pricey 1940 Ford replica in 16", to a '56 Corvette spoked wheel, and a litany of ultra cool import wheels in 13" - 15" sizes, I finally decided to take an affordable, conservative approach. I ordered a 13&1/2" three spoke chrome job with a black outer rim from the hot rod company. The type of wheel that coulda found at a Pep Boys back in the sixties, which is, after all, the period I'm shooting for. I can always upgrade it, if I don't like it.

PICKING MY SEAT

Scored a pair of seat pans. They're John Deere tractors seats. Very compact and utilitarian. Can't wait to try 'em in the car. The next steps will be pedal placement, steering wheel, column and cowl steering.

FRAME UPDATE

We swung over to Marty's today and he's making serious progress on the 29's frame. If the shortened 9" had shown up on Friday as it was supposed to, it would be a roller right now. As it is, the engine mount/ cradle is fabricated (see front of motor shots below), the transmission crossmember is in and the car is looking more and more like a period hot rod by the day. I did an initial test sitting and the next step will be engineering the cowl steering, pedal placement and steering column.

1. 
   

THE MOTOR'S BACK!

Exciting times. I got the 327 back from the machine shop and back on the engine stand in my garage. I took the liberty of double checking the torque specs on the bottom end (65 lb. ft @ the main caps, 35 lb. ft. on the rods and 50 on the oil pump). Everything checked out. I them ran taps into all the remaining holes to make sure everything was nice and clean. I guess I forgot to tell the guys not to paint the engine since I was planning on deburring the block. The next order of business was to remove all paint from the block. Out came the angle grinder, the wire wheels and the picks. In went the ear plugs and I then went about removing flash, smoothing seams and making a racket. Marty's doing such a nice job on the motor plate and frame that I want to make sure the engine looks every bit as well-detailed. It's a big job, and will no doubt eat up a few nights and mornings. Can't wait to get it all nice and pretty and tucked into the 29's frame rails!

BABY SHIT IS A VERY GOOD THING

As I await the engines return and Marty get closer to wrapping up the frame fabrication, I've been spending a fair amount of time thinking about the cars color. I began by liking lime green candy a lot. But I'm seeing a lot of that color lately and it is pretty pimpy. So lately I've challenged myself to think about somethind subtler and perhaps a little less expected. I've been paying a lot of attention to colors on modern cars and there is a jeep metallic I've been seeing lately that I find very interesting.  It's kind of a baby shit green and I've become quite enamored with it. It's not olive drab or too militaristic-looking. While I certainly reserve the right to revert to the original lime green plan, I'm really liking this color a lot and have recently saw the same color on a Rod&Custom feature car. I hope everybody doesn't jump on the bandwagon now.

AND THE ENGINE IS...

After vacillating between a rebuilt stock 283 mill, or de-tuning a roller cammed, balanced and blueprinted 327 shortblock --both of which I own-- I've decided to go the 327 route. Okay, the first order of business is to pull the COMP CAMS 288HR-10 roller cam out and swap in a less aggressive profile.  After doing a lot of online research, including looking at the factory grinds such as the infamous 30-30 and 350LT1 grind, I've landed on my cam of choice. I'm going with a Comp Cams 270H roller cam. If my research bears out, it will offer a nice lumpy idle and loads of low and mid-range torque. I figure my compression in the mid 9's. The heads will be sixties camel humps, even though numerous better flowing options exist. I figure that's the price I'm willing to pay to make it look correct to the sixties era. More to come...

UPDATE: RIDE HEIGHT

Well we're getting closer to having a bonafide roller. This shot reflects the rear ride height we're shooting for. Marty will be hanging the Ford 9" rear and setting up the Posies quarter elliptical springs soon.

GATHERING PARTS

The parts pile is coming together nicely for the '29's drivetrain. Not sure whether I mentioned it before, but I sourced a 9" Ford Detroit locker rear end with a 3.50 rear ratio. I also found a Muncie M-20 4-speed tranny, the one with the 2.52 first gear. Next decision is the engine. Do I run the warmed over 425 Buick Nailhead that I bought it with, or put together a stout little small block chevy for it. I'm leaning towards the small block chevy, figuring the weight savings would make it handle a bit better. I figure a sixties era 327 with one horsepower pure cube would do quite nicely, given the car's weight of 2,000 lbs. Plus, I've got an Edelebrock 3X2 intake with Holley 94's all ready to go should I opt for the 327. If I go with the 425, I'll need to get the transmission adaptor kit from Bendtsen's. Fun times.

I'll keep you posted.

29 ROADSTER IS A GO!

Thanks to a gentleman in Minnesota, my '65 Riviera has a new owner and that means I now have a build budget for my roadster. The body will be headed back out to Marty South for mock-up on the custom frame he's constructed. I've decided to keep the 425 ci nailhead for another project and we're going to set-up the 29 for a small block chevy, preferably a mildly built 327 with a 3X2 intake with a 4-speed backing it up. I also found a 9" Detroit Locker rear with 3.50 gears we're going to put out back. We're going to set-up cowl steering to free up room in the footwell for three pedals. We're just now gathering up the parts and I'll keep you posted. Meanwhile, we're off to vend the Lone Star Round Up. Hopefully, I'll be able to peruse the swap meet area. More details too follow.